Practise with a camera and long lens
A DSLR or mirrorless camera with a zoom lens can capture fine detail in the corona. Rehearse the routine now and the day will feel easy.
Step by step
Choose your lens
200–400 mm on full frame (about 130–270 mm on APS-C) makes the Sun a good size with room for the corona.
Fit the solar filter
On the front of the lens, held snugly. Check for pinholes by holding it up to a lamp, never the Sun: any pinhole or scratch means don't use it, and a clean check alone doesn't prove it's safe.
Focus manually
Use live view zoomed in on a sunspot or the Sun's edge. When it's sharp, tape the focus ring.
Set manual exposure
Start at ISO 100, f/8, 1/500 s and adjust until the disc isn't blown out. Shoot RAW.
Practise bracketing
Set exposure bracketing to 5 or 7 frames, 1 to 2 stops apart. Practise firing it with a remote.
Run a full rehearsal
With a timer, run the whole totality sequence and bracket the corona. Rehearse removing the filter and refitting it indoors, or with the lens pointed away from the Sun, never while it is aimed at the uncovered Sun. Keep the camera's solar filter securely fitted whenever any bright part of the Sun is visible. Remove it only during confirmed complete totality, and restore it before direct sunlight reappears. The clock alone doesn't confirm totality: the filter comes off only once complete totality is confirmed, and goes back on before the first bright sunlight returns.
Settings to start from
| What | Filter | Setting |
|---|---|---|
| Partial phases / sunspots | On | ISO 100, f/8, 1/250–1/2000 s |
| Baily's beads, diamond ring | On | 1/1000–1/4000 s |
| Prominences | Off | 1/500–1/2000 s |
| Inner corona | Off | 1/60–1/250 s |
| Outer corona | Off | 1/4–1/15 s |
The diamond ring at the end of totality. The diamond ring contains direct sunlight and occurs at the boundary of complete totality. This guide does not cover photographing it without a solar filter. Keep the lens filter fitted before C2 and restore it securely before C3. Never look directly at the diamond ring without proper eye protection or through an unfiltered optical viewfinder.
Keep the camera's solar filter securely fitted whenever any bright part of the Sun is visible. Remove it only during confirmed complete totality, and restore it before direct sunlight reappears. Take your glasses off only when the Sun is completely covered, and put them back on before the first bright sunlight reappears at third contact (C3).
Complete totality occurs only when the Sun's bright surface is entirely covered by the Moon. If you are uncertain whether totality has begun or is ending, keep your eclipse glasses and camera solar filter on. Use the contact times (C2 and C3) for your exact spot to be ready, then confirm totality by what you see: no part of the bright Sun visible through your eclipse glasses or filter.
Tips that make the difference
- Weigh the tripod down in wind
- Turn off image stabilisation on a tripod
- Use a remote or 2-second timer
- Spare battery in your pocket, not the bag
- Shade the camera body between shots
- Leave time to look up without the camera
Need the kit?
Start with a solar filter and certified eclipse glasses; see our honest picks on the practice hub and the photography guide.
Frequently asked questions
Can I use eclipse glasses as a camera filter?
No. Glasses are made for eyes, not lenses. A long lens concentrates the light, so use a proper front-mounted solar filter.
Should I use autofocus?
No. Autofocus struggles with the dim Sun through a filter and fails in totality. Focus manually beforehand and tape the ring.
What is bracketing?
Taking several frames at different exposures in quick succession. The corona has a huge range of brightness, so bracketing captures it all for later blending.