ECLIPSE:SECONDS
Phone practice

Photograph the eclipse with your phone

Phones can take a lovely eclipse photo, as long as you practise a few tricks first. Here's how to do it on any sunny day.

Photo: Douglas Duncan/IAU OAE (CC BY 4.0) · CC BY 4.0

Step by step

1

Fit a phone solar filter

A purpose-made phone solar filter, made for your phone, that covers the main lens completely. Use it for every shot of the uncovered Sun.

2

Use a mini tripod

Hand-held phones blur when zoomed. A small tripod or clamp makes everything sharper.

3

Zoom with the main camera

Use 2x to 5x optical zoom if your phone has it. Digital zoom beyond that just gets blurry.

4

Lock focus and exposure

Tap and hold on the Sun until AE/AF lock appears, then slide the brightness down until the disc is orange with a crisp edge.

5

Try a burst

Hold the shutter for a burst, then keep the sharpest frame. Air shimmer means some frames are always better.

6

Rehearse totality

Rehearse removing the filter and refitting it indoors, or with the lens pointed away from the Sun, never while it is aimed at the uncovered Sun. Then practise a wide shot of the sky and horizon: that's where phones shine during totality. The clock alone doesn't confirm totality: the filter comes off only once complete totality is confirmed, and goes back on before the first bright sunlight returns.

Settings to start from

WhatFilterSetting
Partial Sun / sunspotsOnLock exposure, brightness down 1–2 stops
Diamond ring (C2 and C3)OnFilter stays on: the diamond ring is direct sunlight
Totality, wide sceneOffNight mode off, auto, steady on tripod
Totality, corona close-upOffPro mode: ISO 100–400, 1/60–1/250 s

The diamond ring at the end of totality. The diamond ring contains direct sunlight and occurs at the boundary of complete totality. This guide does not cover photographing it without a solar filter. Keep the lens filter fitted before C2 and restore it securely before C3. Never look directly at the diamond ring without proper eye protection or through an unfiltered optical viewfinder.

Keep the camera's solar filter securely fitted whenever any bright part of the Sun is visible. Remove it only during confirmed complete totality, and restore it before direct sunlight reappears. Take your glasses off only when the Sun is completely covered, and put them back on before the first bright sunlight reappears at third contact (C3).

Complete totality occurs only when the Sun's bright surface is entirely covered by the Moon. If you are uncertain whether totality has begun or is ending, keep your eclipse glasses and camera solar filter on. Use the contact times (C2 and C3) for your exact spot to be ready, then confirm totality by what you see: no part of the bright Sun visible through your eclipse glasses or filter.

Tips that make the difference

Need the kit?

Start with a solar filter and certified eclipse glasses; see our honest picks on the practice hub and the photography guide.

Frequently asked questions

Will photographing the Sun damage my phone camera?

Short shots of the bright Sun without a filter can harm the sensor, and zoomed shots are riskier. Use a solar filter for every shot of the uncovered Sun.

Which phone solar filter should I buy?
A purpose-made phone solar filter that covers your main lens completely and is securely fitted. Our phone solar filter guide compares the options.
Do I need a filter during totality?

Only during confirmed complete totality, when the Sun is fully covered, does the filter come off. It must be securely back on before the first bright sunlight reappears at third contact (C3). Keep the camera's solar filter securely fitted whenever any bright part of the Sun is visible. Remove it only during confirmed complete totality, and restore it before direct sunlight reappears.

Which phone mode is best?

Normal photo mode with exposure lock works for most people. If your phone has a Pro or manual mode, practise with it beforehand rather than on the day.